Canon Ij Setup imagePROGRAF PRO-6000S

Canon Ij Setup imagePROGRAF PRO-6000S

Canon Ij Setup imagePROGRAF PRO-6000S

Canon Ij Setup imagePROGRAF PRO-6000S

Canon Ij Setup imagePROGRAF PRO-6000S – As I indicated in a progressing post, my old considerable association printer has surrendered the ghost, so I’ve as of late had another Canon imagePROGRAF PRO-6000S presented, and today I will walk you through a bit of the key new features and give my sentiment of this new printer.

To come to the heart of the matter, with my old 24″ iPF6350 breaking after just six years, for a few minutes, I considered moving a long way from Canon for my broad association printing, anyway then I comprehended that there was a different line of far reaching arrangement printers that has as of late been accounted for, so I examined, and was to a great degree stimulated by what I saw.

At first, I was essentially going to supplant my 6350 with the PRO-2000,Canon Ij Setup imagePROGRAF PRO-6000S which is the successor 24″ wide move media printer, yet despite the way this new extent of PRO printers are littler, they are more than twofold the stature, which infers the PRO-2000 can’t be passed on up to my third floor studio. It basically won’t fit around the most noteworthy purpose of the stairs, even stayed on end.

There was an other option to have it crane lifted up to the third floor and go in through the window, anyway this would cost $1,500, and after that clearly another $1,500 to have it cut down again if I move, or when it certainly breaks again at some point or another what’s to come.

I accepted on the off chance that I would spend another $3,000 I should put that money towards an imagePROGRAF PRO-6000S, which is the 44″ wide more established kin of the PRO-2000, and have that presented on my second floor as opposed to up in my studio. Besides, when I say senior kin, I genuinely do mean BIG, as ought to be clear in this photo of me with the printer consequent to having it installedBefore singing the assention, I went to the Canon S Tower here in Tokyo and made different broad prints on three sorts of Breathing Color media, and I was to a great degree content with the results. Note that I did my tests on the PRO-2000, going before I heard the cost for the crane lift, anyway the 2000 and 4000 are essentially indistinct beside the width of move media that can be used. This in like manner suggests this review will be comparatively as important in case you are pondering the PRO-2000 as it will for the PRO-4000.

Anyway, my imagePROGRAF PRO-6000S met up on August 9, and took four people to pass on it up to the second floor, and put it onto its stand. I have since spent the latest five days setting it up, making my ICC profiles, and winding up more familiar with this dazzling new greater setup printer from Canon.

What’s New?

Before we look at a couple of prints, we should talk a little about what’s new with the imagePROGRAF PRO-6000S. Everything considered, Canon have released another course of action of inks for this lineup called LUCIA PRO ink, which truly reduces the amount of tints from 12 to 11 shade inks, yet they incorporated another Chroma Optimizer.From the Canon site, I see that “LUCIA PRO ink design fuses scaled down scale typified colorants that enable smooth slants, an expanded shading degree, and more significant shading verbalization.” In various ways, I agree with this declaration, yet I’m truly not convinced that the shading cluster is broadened. Frankly, for some specific conditions using matte media I’d the exhibit has been gotten a bit, anyway I’ll talk more about this later…

The Chroma Optimizer is used when engraving on cleaned and semi-reflexive media, and goes about as a sensible coat, upgrading shading and enhances the diminish regions of sparkle prints. The new inks and Chroma Optimizer are in like manner said to improve scratch restriction and reduction graininess. We’ll examine some bona fide prints immediately.

I was in like manner happy to find that the dim line that was for each situation left on the right underside of the prints isn’t any more an issue. That is something that disturbed the perdition out of my about my iPF6350 and I understand this was not settled the 6450, so it’s wonderful this is finally fixed.Only One Print Head

Despite the fact that my old printer had two print heads, costing around $300 each, the new PRO printer lineup use just a single, 1.28″ wide print head with 18,432 spouts and antagonistic to hindering advancement. This new print head costs around $500, so there’s a $100 saving when that ought to be supplanted, tolerating that you’d change the two heads on the old models clearly. Having as of late the one head in like manner engaged Canon to make the printer littler in width, which is a lovely space saver.Having essentially the one print head also enabled Canon to quicken the printing stunningly. A 18 x 24 inch print on my old printer used to take around 9 minutes, yet with the new PRO-4000 a comparative size print takes vague 3 minutes 40 seconds.

New Media Loading Mechanism

The media stacking instrument has similarly been totally changed. You right now stack the move from the front of the printer by opening the Top Cover and the Output Guide as ought to be clear in this photo (underneath). Resulting to dropping the media on its holder into put, you turn the move holder which deals with the media up into the printer, until the point that the moment that you hear a boom, to disclose to you that the printer would now have the capacity to feed the media.Then, you close the two covers and press a catch the LCD show to encourage the printer to just ahead and feed the paper. Not only does this mean we don’t have to contact the paper to such a degree, we similarly now have the benefit of the paper being upside down for as a general rule before it’s engraved on.

This is favorable position since it suggests that deposit is more loath to settle on the print side of the media as you print, and buildup that is presently on the media, will presumably tumble off, before it’s engraved on. In case you print on dust, the deposit all around tumbles off as the print dries, leaving a white spec, and for the quality aware printer that infers that the print has be made again beginning with no outside help.

Media Information Update

Another outstandingly good touch that I’m relatively sure I couldn’t do with my old iPF6350, is that you can invigorate the Media Information in the printer drivers on various PCs. Beforehand, in case I incorporated a custom media create, like a move of Breathing Color paper, to the printer, to get that same media in the drivers on an other PC, I expected to use the Media Configuration Tool and incorporate the media again.Wifi and Gigabit Ethernet Connectivity

The PRO game plan of printers as of now also reinforces Wifi Connectivity and the wired framework interface is directly Gigabit Ethernet. We can in like manner still interface with the printer with USB. You would now have the capacity to print PDF and JPEG records particularly from a memory stick moreover.

I have now printed with Wifi, LAN and USB, and watched Wifi to be a little on the direct side for a reasonable estimated print, so I obtained a 10 meter USB interface so I can print from my eating table, which really speeded things up. In spite of the way that it’s singular High Speed USB2, it’s impressively speedier than Wifi.

imagePROGRAF PRO-6000S, I furthermore truly obtained a 20m Ethernet interface, with the objective that I can associate the PRO-4000 particularly to my switch on the 3F if I need to finish an impressive measure of work from the studio. With USB being so speedy, I don’t know I’ll do this routinely, anyway I in any occasion by and by have the option.

Three Sizes of Ink Tanks

Another phenomenal change as I might want to believe is the ability to now peruse three sizes of ink tanks, with 160ml, 330ml, and 700ml tanks open. My old iPF6350 took 130ml ink tanks, so even the humblest of the new tanks holds 30ml more ink. I could finish off the new PRO-4000 with 160ml tanks, anyway now having the other option to present greater tanks, and mix and match the sizes, infers we can pick the tank assess in light of how quickly the inks rundown.

The PRO-4000 goes with a game plan of ink cartridges holding 190ml. Before we brought the cartridges into the printer, I took this photograph for examination (underneath). On the left is a 190ml cartridge, and on the benefit is a 700ml.Mix and Match Inks

Canon Ij Setup imagePROGRAF PRO-6000S

OPERATING SYSTEM DOWNLOAD
Canon series Mini Master Setup (OS X 10.6/10.7/10.8) Download
Canon series CUPS Printer Driver Ver.16.10.0.0 (Mac) Download
Canon series MP Driver Ver. 1.05 (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP) Download
ICA Driver Ver. 3.3.4 (OS X 10.6) Download
Canon series CUPS Printer Driver Ver. 11.7.1.0 (OS X 10.5/10.6) Download
Canon series MP Driver Ver. 1.05 (Windows XP x64) Download
Printer Driver for Mac OSX Download
Canon series Scanner Driver Ver. 17.4.1b (OS X) Download
Canon series XPS Printer Driver Ver. 5.56 (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64) Download
Linux IJ Scanner Driver Download

Canon Ij Setup imagePROGRAF PRO-6000